The Importance of Colors of Underground Utility Lines
Underground utilities can easily be identified today. However, a long time ago, it was difficult to identify these utility lines and so when people try to dig there were many risks involved. Although not completely eliminated, risks today have been reduced. In order to prevent harm, it is important to know or identify these utility lines if your need to dig the ground. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. You dont want something disastrous to occur. If you hit any of the underground utility lines while digging then you can be fatally injured. The location of the areas where the lines were struck can experience service interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. When the number is called, you can let the utility companies come out and mark their respective lines.
But, despite the marks, there will sill be accidents. Utility lines are struck every 6 minutes, some place. Traffic lights, wastewater pipes, telecommunication lines, etc. are affected when lines are struck. Public heath and safety is affected when this happens.
Companies can locate utility lines through the use of GPR or Ground Penetrating Radar. This has made it easier to locate utility lies underground and other important things. Calling 811 is enough for the property owner to let companies located their lines.
Today, utility lines are marked with different colors for easy identification. Here are the colors used for different utilities.
Proposed excavation sites use white lines. It locates areas that will be excavated in the near future.
Pink lines are temporary survey markings. These are used by surveyors to mark off legal property boundaries.
Red lines are used to mark electric power lines, cable, conduit, and lighting cable. The color red is associated with fire and danger so it is just appropriate to use it for electrical works.
Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.
If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. Blue lines are used for potable water. Reclaimed water, irrigation, and slurry lines used purple lines. If you see the color green, then it indicates sewer and drain lines. Hitting this line can truly derail any project for a long period of time.
Click here now if you want to learn more about the color coding of utility lines. View here for more.