Some Common Plumbing Problems
Once in a while, homeowners encounter plumbing problems. Plumbing problems can be of different types. Here are some of the most common ones. In this list, we will also find out how to identify these problems, and give you a few DIY solutions.
Many times our drains get clogged. If water passes quickly without collecting in the sink or tub, then your drain is clear. Your drains are clogged if the water does not drain. Many times clogs are formed by soap and hair. One way you can attempt to clear the clog is by pouring hot water into the drain to dissolve soap. If there are solid objects in your drain, then you can use a drain snake or a wire coat hanger.
Using chemical drain cleaners can damage your plumbing. The reason is that they contain lye which reacts with water with heat. Your plumbing can be burned and damaged with this. If you are unable to solve your clogged drains, then you should call your professional plumbing service and repair company.
You can also encounter toilet backup. The blockage can be cleared with the use of a toilet plunger. If not, flush the toilet with hot, soapy water from waist high. Your toilet can flush with the force or it can simply fill and not flush. After pouting 2 to 3 buckets of water, your problem may be solved.
A leaking faucet is not only annoying but it will also increase your water bill. Leak drips from the mouth of the faucet but it actually comes from the handle. It is important to know which handle is responsible for a double handle sink hardware. To find out which handle is leaking, turn the hot and cold valves off one at a time.
The parts of the leaking handle should be removed. It is important to the pieces and make sure to replace the cartridges and o-rings are needed. Your handle will have a proper seal if you clean the parts. There is nothing to be replaced.
if there is low water pressure, then it will take a lot of time to wash dishes. This can be remedied by cleaning your aerator. If there is a build-up of sediments and minerals then pressure slows down. Make sure to check your aerator for rust. Replace the rusted parts. Use a brush or soak in vinegar overnight to clean your aerator. When you place it back, it should be tight.
If you are not able to fix your plumbing problems with these DIY solutions, then you should call a professional plumber to fix your problem.
plumbing service and repair plumbing service and repair
plumbing service and repair plumbing service and repair
plumbing service and repair plumbing service and repair
plumbing service and repair plumbing service and repair
plumbing service and repair plumbing service and repair
plumbing service and repair plumbing service and repair
Featured post: useful source
